Baghouse Dust Collector SCR Process

Selective catalytic reduction (SCR) is the most effective DeNOx process. In this process, nitrogen oxides (NOx) are converted into nitrogen and water on a catalytic surface.

DENOXIFICATION PROCESS

Ammonia water or urea are used as reducing agents. The end products are nitrogen and water. The catalyst enables the simultaneous oxidation and thus elimination of dioxins and furans.

The MikroPul fabric filter SCR process removes dust and several gaseous compounds in a single process step!

For this purpose, a catalytic bag filter consisting of a catalytic fabric layer is installed in a standard filter bag.
Both the catalyst formulation and the fabric material for the catalytic inner layer and the dust filter layer are optimized according to the process requirements - eliminating the need for costly, space-consuming "tail-end" DeNOx equipment.

KEY BENEFITS

Removes dust and multiple gaseous compounds in a single step in the bag filter housing
Simultaneous separation of nitrogen oxides (NOx) and dioxins / furans
Reduces and controls NH3 slip e.g. from upstream (SNCR) to ensure compliance with NH3 regulations.
Reliably achieves the low BREF emission values for nitrogen oxides (NOx)
No need for a costly, space-consuming clean gas SCR solution and therefore lower investments
Less space required
No steam/gas heat exchanger required - lower energy consumption
Low pressure drop and therefore lower energy costs
Lower operating costs
Service life and pressure drop are comparable to conventional fabric filters

Contact us to create your custom solution

Call us at: +44 845 274 3434 or fill out the form below.

Loading component...

Baghouse Dust Collector SCR Process

Selective catalytic reduction (SCR) is the most effective DeNOx process. In this process, nitrogen oxides (NOx) are converted into nitrogen and water on a catalytic surface.

DENOXIFICATION PROCESS

KEY BENEFITS

Removes dust and multiple gaseous compounds in a single step in the bag filter housing
Simultaneous separation of nitrogen oxides (NOx) and dioxins / furans
Reduces and controls NH3 slip e.g. from upstream (SNCR) to ensure compliance with NH3 regulations.
Reliably achieves the low BREF emission values for nitrogen oxides (NOx)
No need for a costly, space-consuming clean gas SCR solution and therefore lower investments
Less space required
No steam/gas heat exchanger required - lower energy consumption
Low pressure drop and therefore lower energy costs
Lower operating costs
Service life and pressure drop are comparable to conventional fabric filters